Education English | Procedure Text : How To Make a Monster with Bright Eyes |You will need :
• 2 bulbs in bulb holders
• 3 wires
• a battery
• coloured card
• coloured paper
• scissors
• sticky tape
• glue
Instructions :
1. Attach a wire to each of the screws on one bulb holder.
2. Connect the other end of one of these wires to the second bulb holder. Connect your third wire to the other screw on the second bulb holder.
3. Connect the loose wires to the ends of the battery.
4. Cut the card into a monster face with two eye holes. Push the bulbs through the holes in the back of the card. Tape the bulbs and the battery onto the back of the card.
5. Turn the monster face around. Finish it by gluing on a paper mouth and nose. Watch the eyes glow!
Taken from How Does It Work?, 2001
To Get More “Procedure Text” please Click Here.
• 2 bulbs in bulb holders
• 3 wires
• a battery
• coloured card
• coloured paper
• scissors
• sticky tape
• glue
Instructions :
1. Attach a wire to each of the screws on one bulb holder.
2. Connect the other end of one of these wires to the second bulb holder. Connect your third wire to the other screw on the second bulb holder.
3. Connect the loose wires to the ends of the battery.
4. Cut the card into a monster face with two eye holes. Push the bulbs through the holes in the back of the card. Tape the bulbs and the battery onto the back of the card.
5. Turn the monster face around. Finish it by gluing on a paper mouth and nose. Watch the eyes glow!
Taken from How Does It Work?, 2001
To Get More “Procedure Text” please Click Here.
No comments:
Post a Comment